PCIe card 16 port RS-232 Card

Industrial 16 port Serial RS232 PCI Express Card 2020-03-03 Diarts designs Industrial 16 port Serial RS-232 PCIe Card. One card supports 16 port RS232 with full signal TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND. Therefore we have to use VHDC68 connector. That is reason the card can support with 16 ports, also for 8…

Details

FTDI-US210i USB to 1 port RS422 RS485 Adapter 3KV Isolation 600W Surge

FTDI-US210i USB to 1 port RS485 RS422 3KV Isolation Adapter Industrial FTDI Serial Converter Din Rail Wall Mount kit   Diarts releases FTDI-US210i USB to 1 port RS-422 RS-485 3KV Isolation Adapter FTDI Serial Converter with 3KV Isolated 600W Surge. Design with Industrial Din Rail Wall Mount kit. The Operating Temperature is up to -30…

Details

Sata express adapter

The Serial ATA (SATA) interface was designed primarily for interfacing with hard disk drives (HDDs), doubling its native speed with each major revision: maximum SATA transfer speeds went from 1.5 Gbit/s in SATA 1.0(standardized in 2003), through 3 Gbit/s in SATA 2.0 (standardized in 2004), to 6 Gbit/s as provided by SATA 3.0 (standardized in 2009). SATA has also been selected as the interface for gradually more…

Details

usb3.1 gen1 vs gen2

USB 3.1 In January 2013 the USB group announced plans to update USB 3.0 to 10 Gbit/s (1.25 GB/s). The group ended up creating a new USB specification, USB 3.1, which was released on 31 July 2013, replacing the USB 3.0 standard. The USB 3.1 specification takes over the existing USB 3.0’s SuperSpeed USB transfer rate, also referred to as USB…

Details