RS232 to RS422 RS485 3KV Isolation

High Speed Baud Rate up to 921.6Kbps

Built-in Terminator 120 ohm for DIP Switch Setting

Max 10 Device connectivity for 4 Wire RS-485(RS-422 Multi-Drop) Mode

Max 32 Device Connectivity for RS-485 Mode

Communication status can be monitored through LED

3KV Optical Isolation Protection

600W Surge Protection

Built-in 15KV ESD protection for all Serial Port and RS-422/485 Signals Protection

Supports Industrial Specification

No Driver Needs


Description

Product Description: High Speed Bi-Directional RS-232 to RS-422/485 3KV Optical Isolation, 600W Surge Converter. With DIN Rail Kit

Item Number: SERCO-1121i

 

Auto RTS Control

Under 1:N communication environment, it is undesirable that multiple devices send data at once, causing electrical collision that leads to an error. In order to prevent this, only one device needs to send data at a time, which means that data I/O control is necessary at certain points. performs automatic toggling by hardware, saving extra programming work.

 

What is RS485 Echo Mode

The point which is different from the method for RS485 Non-echo mode is that the output signal line by itself is input again to the input signal line. Therefore, it is possible to confirm whether the data sent crashes with the data sent by another terminal or not by reading the echoed data. This operating mode is scarcely used except in some special purposes. On all operation is controlled by hardware circuit so no operation is required by application program.

 

Using 4-wire RS485

4-Wire RS485 Networking is same as RS422 Multi-Drop Networking. RS422 device is used as master and RS485 device is used as slave in 4-Wire RS485 bus. Although RS422 and RS485 have different electrical standards, most manufacturers make ICs that uses both RS422 and RS485 interface. Therefore, RS422 Multi-Drop and 4-Wire RS485 can be considered equal.

 

Features and Benefit

High Speed Baud Rate up to 921.6Kbps

Built-in Terminator 120 ohm for DIP Switch Setting

Max 10 Device connectivity for 4 Wire RS-485(RS-422 Multi-Drop) Mode

Max 32 Device Connectivity for RS-485 Mode

Communication status can be monitored through LED

3KV Optical Isolation Protection

600W Surge Protection

Built-in 15KV ESD protection for all Serial Port and RS-422/485 Signals Protection

Supports Industrial Specification

No Driver Needs

 

Specification

Hardware

RS-422/485 Connector: Terminal Block 7 Pin 5.08mm

RS-232 Connector: DB9 Female

 

Interface

Serial Standard: RS-232 and RS-422/485

 

Line Protection

ESD Protection: 15KV ESD Protection for all signals(for RS-232/422/485)

Optical Isolation Protect: 3KV Opto Isolation(for RS-422/485)

Surge Protection : 600W Surge Protection for RS-422/485 Signals(for RS-422/485)

 

Performance

Baud rate: up to 921.6 Kbps

 

Distance

Max 1.2Km by 115.2Kbps, 24 AWG Twisted Pair Cable

 

Serial Communication Parameters

Data Bits: 5, 6, 7, 8

Stop Bits: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

RTS: Auto Toggling

 

Serial Signals

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422: Tx+, Tx-, Rx+, Rx-, GND

4 Wire RS-485(RS-422 Multi-Drop): Tx+, Tx-, Rx+, Rx-, GND

RS-485(2 Wire RS-485) : Data+, Data-, GND

 

Driver Support

No Driver needs

 

Physical Characteristics

Housing: PC

 

Environmental Limits

Operating Temperature: -30 ~ 75℃

Storage Temperature: -40 ~ 85℃

Ambient Relative Humidity: 5 ~ 95% Non-Condensing

 

Standards and Certifications

CE and FCC supports

 

Product Production

Production: Made in Taiwan

Product Location: Taipei, Taiwan

 

Package Content

High Speed Bi-Directional RS-232 to RS-422/485 3KV Isoaltion 600W Surge Converter x 1

DIN Rail Kit x 1

Quick Instill Guide x 1